Technical features LC-3000's design and its specific structure cam curve 6p test instruments offer, a difference of 180 ° cam advance the plunger rod 6p test equipment in the motor driven by the completion of the infusion process. Main and auxiliary cam has the same base radius, the main lift cam 10, cam lift pay for 7.125; the plunger steady stream output during operation. Designed a special damper buffer system with main and auxiliary cam match, you can get a very low pulse output flow patterns, to overcome the traditional buffer system failure rate, inadequate and poor results. Special design and synergies cam and damping effectively reduces the flow pulsation of compression due to differences in the composition of the different factors which led to the traffic caused by the differences can be automatically adjusted to avoid the high cost of dual pressure sensor. Dual buffer system protection valve and pressure combination, it is possible to effectively prevent each infusion process reflux phenomenon. Traditional plunger propulsion system for a new design, and even improve the traditional lever and plunger rod integral structure for sub-structure to ensure that the plunger rod back into place in a shorter time, pulsation phenomenon due to the pressure difference caused by the reduced to a minimum, get a very stable low pulsation flow and the mechanical noise is also extremely low. The new design uses a patented motor control technology to improve the low frequency operation characteristics, reduced pulsation phenomenon, expanding the infusion pump flow range, the flow range up to six orders of magnitude (flow range from 0.1ul / min-10.000ul / min ). These special design 6p test equipment prices, making the two plunger pump head during a very small amount of liquid alternately generated corresponding pressure rebound, avoid the use of full vacuum injection method to bring produce bubbles and holes and other issues, not for additional specific components, greatly simplifying the design and reducing costs, while increasing the stability of the pump painted children's products and toys containing lead paint does not exceed 90ppm (0.009%) inks 6p test equipment, regulations promulgated by the date one year after (2009 On August 14th) mandatory third-party testing requirements for certain children's products: regulations take effect 90 days after starting (November 12, 2008), children's product manufacturers and private label products must be sent --- a qualified independent third party testing organization for the relevant test --- issued certificate attesting that the product meets applicable standards or regulations to force --- specific product information, test facility requirements and time requirements, please pay attention to the relevant technical documentation updates EBO Shoes 6p test equipment, 6p test equipment, phthalates are provided by Shenzhen Huayi Technology Co., Ltd. universal. Shenzhen Huayi Technology Co., Ltd. Four Seas (huayi-universal.com) (www.huayi-univerasl.com) strong, credible, in Shenzhen, Guangdong analytical instruments industry has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead Huayi universal and you work into the brilliant, for a better future!